Grating Solutions for Every Industry — Oil & Gas to Infrastructure
Industrial grating is a custom-engineered product, not a stock commodity. The bearing bar section, pitch series, surface treatment, and panel dimensions that work on a refinery pipe rack will fail inspection on an offshore module or a wastewater channel. That is why GoGrating organizes its export program by application: we fabricate steel grating and molded or pultruded FRP grating to your project drawings, from our factory base in Anping, Hebei — the grating and wire-mesh capital producing over 70% of China's output, with 800+ fabrication plants within 30 km.
Every order is made to specification. Bearing bars run from 20×3 mm to 100×9 mm in 19-space and 15-space pitch series, with panels cut to order and finished hot-dip galvanized to ASTM A123, painted, untreated, or in stainless 304/316. Fabrication follows YB/T 4001.1 and ANSI/NAAMM MBG 531 under an ISO 9001 quality system, with CE marking available for European projects.
Industries We Serve
Oil & gas remains the largest consumer of heavy-duty grating: platform flooring, pipe-rack walkways, and stair treads on refineries, tank farms, and offshore modules — typically serrated hot-dip galvanized steel for slip resistance in oily conditions. Power generation projects, from thermal plants to solar and hydro, specify grating for turbine-hall mezzanines, boiler access platforms, and cable trench covers. Water and wastewater plants increasingly switch to FRP grating over clarifiers, aeration basins, and dosing areas, where isophthalic or vinyl ester resins withstand continuous chemical and moisture exposure without the repainting cycle coated steel demands.
Mining operations in Australia, Latin America, and Southeast Asia call for heavy bearing-bar sections — toward the 100×9 mm end of the range — on screen decks, conveyor walkways, and crusher platforms exposed to impact and abrasion. Marine and offshore buyers, including ports and shipyards, generally specify stainless 316 steel grating or covered FRP grating against salt spray. Chemical processing plants follow the same logic: where acids, caustics, or solvents are present, molded FRP grating in the correct resin system often outlasts galvanized steel several times over.
Manufacturing facilities use grating for mezzanine floors, machine-access platforms, and ventilation flooring, where 19-space series panels balance open area with point-load performance for foot and trolley traffic. Transport and infrastructure projects — bridges, highways, rail, and municipal drainage — rely on trench covers, sump grates, and walkway panels fabricated to the engineer's drawings and the governing national standard. If your sector is not listed, the same engineering process applies: send the duty conditions and we will propose a section.
Featured Application Case Studies
Recent export programs show how specification drives selection. For a Middle East refinery expansion, an EPC contractor ordered serrated hot-dip galvanized steel grating with banded ends and matching stair treads, fabricated to ANSI/NAAMM MBG 531 directly from the contractor's CAD layout — panels arrived numbered to the installation plan. For a Southeast Asian municipal wastewater plant, the consultant specified molded FRP grating in isophthalic resin with a gritted top surface for clarifier walkways, chosen for corrosion resistance and a light weight that let crews install panels without lifting equipment.
Because every project carries different loads, spans, and environments, we do not publish generic load claims or prices. Send your drawings, span requirements, or even a simple sketch, and our engineers will return a specification proposal with engineered load tables referenced to the applicable standard. Request a quote — DWG, PDF, and STEP files are all welcome.
- Made to project spec — never stock SKUs
- Bearing bars 20×3 to 100×9 mm, 19-space and 15-space series
- Hot-dip galvanized to ASTM A123, painted, untreated, or stainless 304/316
- Fabricated to YB/T 4001.1 and ANSI/NAAMM MBG 531
- Steel and FRP grating lines under one ISO 9001 system
- Exporting to the Middle East, Southeast Asia, Europe, Australia, and the Americas
Grating for Chemical Plants
Corrosion-resistant grating for chemical plants: FRP grating in vinyl ester or isophthalic resin and stainless
Grating for Industrial Platforms
Welded steel and FRP grating for industrial platforms, mezzanines, catwalks and walkways. Factory-direct from
Grating for Infrastructure
Grating for infrastructure from GoGrating — bridge gratings, airport drainage covers, transit platforms & walk
Grating for Marine & Offshore
Marine and offshore grating for shipyards, ports, docks and platforms: hot-dip galvanized steel, FRP and stain
Grating for Mining
Heavy-duty mining grating from GoGrating: custom steel and FRP grating for platforms, walkways and stairs in m
Grating for Oil & Gas
Hot-dip galvanized, stainless & FRP grating for offshore platforms, refineries & petrochemical plants. Factory
Grating for Power Plants
Steel and FRP grating for thermal, nuclear, hydro and renewable power plants — cooling towers, turbine platfor
Grating for Wastewater Treatment
Corrosion-resistant FRP and hot-dip galvanized steel grating for wastewater treatment plants. Anti-slip, chemi
Frequently Asked Questions
Can grating be customized to my project drawings?
Yes — customization is our standard mode, not an exception. Every order is fabricated to your specified bearing bar size (20×3 to 100×9 mm), pitch series, panel dimensions, cutouts, banding, and surface treatment. We work directly from DWG, PDF, or STEP files, and our engineers can also propose a section from your load and span requirements.
Is there a minimum order quantity?
There is no rigid catalog MOQ because gratings are made to order. Full-container shipments are the most economical for export, but smaller trial orders and mixed steel/FRP consignments are regularly arranged for new distributors and EPC pilot packages. Send your bill of quantities and we will confirm feasibility.
What is the typical lead time for an export order?
Lead time depends on specification, surface treatment, and quantity, so it is confirmed with each quotation rather than quoted generically. Providing complete drawings and a finalized spec up front shortens engineering review and keeps production on schedule. Hot-dip galvanizing to ASTM A123 is handled in-region, avoiding added transit delays.
Which standards do your gratings comply with?
Steel grating is fabricated to YB/T 4001.1 and ANSI/NAAMM MBG 531, with hot-dip galvanizing to ASTM A123 and stainless 304/316 options. Production runs under an ISO 9001 quality system, and CE marking is available. Engineered load tables referenced to the applicable standard are provided with each quotation on request.